null
  Loading... Please wait...

Categories

SmartPlug RV Kit 30 Amp 30 Dual Configuration Cordset - Black (SPX X Park Power) Stainless Steel Inlet [R30303BM30NT]

  • SmartPlug RV Kit 30 Amp 30 Dual Configuration Cordset - Black (SPX X Park Power)  Stainless Steel Inlet [R30303BM30NT]
  • SmartPlug RV Kit 30 Amp 30 Dual Configuration Cordset - Black (SPX X Park Power)  Stainless Steel Inlet [R30303BM30NT]
  • SmartPlug RV Kit 30 Amp 30 Dual Configuration Cordset - Black (SPX X Park Power)  Stainless Steel Inlet [R30303BM30NT]
RRP:
$448.00
Your Price:
$380.00 (You save $68.00)
Brand:
Weight:
11.40 LBS
Delivery:
Calculated at checkout





Product Description

RV Kit 30 AMP Dual Configuration Cordset and Stainless Steel Inlet Combo - 30'

People discovering the joys of RVing are often unaware of the dangers lurking in their outdated, Twist-type park power connections.  Today's RVs have enormous electrical draws. Microwaves, TVs, in-floor heating and slide-out systems are conveniences that weren't even invented when the L-style pin system was introduced in the 1930s.

These Pigtail Adapters have an asymmetrical design with locking, multi-point stainless steel side clips for simple one-handed operation.  These Pigtail Adapters are designed for extreme weather conditions. 

The 30 AMP 125 V RV cordset provides a weather resistant power cord solution for park power. The cordset comes with the SmartPlug connector for the RV side and the industry standard three pin connector for the park power side.  It comes standard with a cool blue LED Power indicator on the female connector, a special coating that makes it more flexible and easy to roll up.

Features:

  • Eliminates Overheating – Increased pin and clip surface area greatly improves electrical conductivity during high amperage demand.
  • Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark.
  • Multi-Point Locking System – Side clips and inlet cover lock the plug body securely into the inlet which eliminates any stress on the electrical components by movement of the power cord.
  • Weather Resistant Seals – Multi-fin silicone gaskets installed in the plug body eliminate any water penetration when plug is connected to inlet.
  • Quick and Easy Installation – Inlet mounting flange holes match existing inlet holes for an installation that is typically finished in 30 minutes.

Technical Specifications:

  • Length - 30'
  • Cordeset Color - Black
  • Inlet Color - Stainless Steel
  • Vehicle Side Connection - 30 AMP/125 V SmartPlug
  • Park Side Connection - 30 AMP/125 V Push Type Plug

In the Box:

  • 30' Cordset
  • Inlet cover
  • Instruction manual

*Sold as an Individual

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

  • Type: Power Cords
  • Box Dimensions: 5"H x 13"W x 14"L WT: 11.4 lbs
  • UPC: 682500440571

Owner's Manual (pdf)
Brochure (pdf)

Product Videos

How to Install the SmartPlug 30 Amp Inlet | Instructions (02:34)
In this video, you will learn how to install the SmartPlug 30 Amp inlet. The SmartPlug is a revolutionary shore power system designed to replace the outdated and problematic twist-type design in use today. Smart Plug is The Smartest Way to POWER AND PROTECT YOUR BOAT & RV. It is intuitive to use and provides greater protection against loose connections and corrosion – the leading causes of shore power failure and fires. Contrary to popular belief, the #1 cause of shore power failure and fires is not electrical shorting, but rather overheating caused by poor electrical conductivity. How does this happen? The problems with many plug designs are that the shape of electrical pins allow for very little contact area, and the pins themselves are also largely responsible for bearing any physical stress placed on the cord (from the constant movement of the boat, someone tripping on the cord, etc…) This results in the pins working loose, further lessening the precious little contact area they had to begin with. Furthermore, such loose connections allow for moisture intrusion and ultimately corrosion of the pins. Arcing occurs and the connection heats up, scorches, and in some cases, catches fire. Because the current draw is unchanged, all of this happens long before a breaker or a GFCI can cut the power. Additionally, the old design can be very difficult to use in low light or hard-to-reach scenarios since the “L” shaped pin must first be located and then oriented before connection. SmartPlug’s 4-Stage solution protects against overheating every step of the way. Loose connections are addressed by a Sleeve Design and Multi-Point Locking System which takes all the physical stress off of the pins while securely fastening the plug to the receptacle. The pin contact area is increased by more than 20x and protected behind three weatherproof seals for a dry and corrosion-free connection.
  • How to Install...
    In this video, you will learn how to install the SmartPlug 30 ...
  • SmartPlug Syst...
    In this video, you will learn The Smartest Way with Kevin Harr...

Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!